Soot, smoke and wiring handled by a licensed local crew

Electrical Fire Cleanup in PALOS VERDES PENINSULA, California

Electrical Fire Cleanup in PALOS VERDES PENINSULA, California starts with a thermal scan and ends with a wiring inspection you can hand to your insurance adjuster. We pull charred drywall, neutralize smoke residue, and verify every circuit before power comes back on. Whether the fire started in a Malaga Cove panel or a Lunada Bay attic, our electrical fire damage restoration crew is on call 24/7.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Palos Verdes Peninsula — your local Fire Damage Restoration team
Careful work. Honest options.
About this service

What Electrical Fire Cleanup in PALOS VERDES PENINSULA, California Covers

Electrical Fire Cleanup in PALOS VERDES PENINSULA, California is a specialized restoration service that removes char, soot, smoke residue and contaminated insulation after a wiring, panel or outlet fire, then verifies the electrical system is safe to energize. It is not a wipe-down. We open walls to find hidden char, HEPA vacuum the cavities, seal framing with a char-blocking primer, and document every step for your claim.

Most electrical fires here start small and smolder inside a wall or attic before anyone smells smoke. In Palos Verdes Estates and Rolling Hills, original 1950s to 1970s knob-and-tube and aluminum branch wiring is still in service, and that aging insulation is exactly where a fire begins. If you are searching for electrical fire cleanup near me in PALOS VERDES PENINSULA California at 2 a.m., call (833) 929-6186 and we will dispatch a crew with a thermal imaging camera and air scrubber.

  • ✓ Hidden Char Found Fast
  • ✓ Smoke Odor Actually Gone
  • ✓ Wiring Verified Before Power
  • ✓ Claim-Ready Documentation
What's included

What Electrical Fire Cleanup Includes

Every job includes assessment, soot and char removal, deodorization, wiring verification and documentation. Rebuilding the wall is a separate scope, and we quote it upfront so you can decide whether to use us or your own contractor. Nothing gets added to the invoice without your approval.

✓

Thermal Assessment

A thermal imaging camera and moisture meter map hidden heat and firefighting water before any wall is opened. You see the photos and the marked-up findings before demolition begins.

✓

Soot and Char Removal

HEPA vacuums, soot sponges and hand tools remove residue from framing, drywall and ceilings. Unsalvageable drywall, insulation and lumber are cut out and hauled away.

✓

Deodorization

Air scrubbers, hydroxyl or ozone generators and smoke odor counteractant fogging treat the cavities and the air. Equipment typically runs 48 to 96 hours depending on how far smoke traveled.

✓

Wiring Verification

A circuit-by-circuit check for burned neutrals, melted insulation and water intrusion, with damaged devices and wiring replaced before power is restored.

✓

Claim Documentation

Photos, moisture logs and a line-item material scope delivered as a closeout packet for your adjuster, typically 80 to 150 photos on a whole-room job.

How it works

How Our Electrical Fire Cleanup Process Works

01

Emergency Response

Call (833) 929-6186 and we roll a crew with negative air machines and board-up materials. First we secure the structure, kill any remaining power at the panel, and stop water from firefighting from spreading into adjacent rooms. Most PALOS VERDES PENINSULA arrivals happen within 60 to 90 minutes.

02

Assessment and Scope

A IICRC Fire and Smoke Restoration Technician walks the structure with a thermal imaging camera and moisture meter. We map char, test smoke-affected surfaces, and check the HVAC system for soot pull-through. You get a written scope and an upfront price before demolition starts.

03

Soot and Char Removal

Crews HEPA vacuum loose soot, sponge walls with soot sponges, and cut out unsalvageable drywall, insulation and lumber. Structural char is sanded back to sound wood and sealed with a char-blocking primer. This stage usually takes one to three days depending on how far the fire traveled.

04

Deodorization and Air Quality

We place air scrubbers and either a hydroxyl generator or ozone generator, then fog smoke odor counteractant into wall cavities and ductwork. HVAC filters and duct sealant get replaced or sealed so the system does not redistribute soot the first time you run the heat. Expect two to four days of equipment run time.

05

Wiring Check and Handoff

Before we pull equipment, we verify every affected circuit, replace damaged wiring and devices, and photograph the finished work. You receive a closeout packet with moisture logs, material lists and the wiring inspection, ready for your adjuster and your electrician of record.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal imaging camera

Maps hidden heat damage inside walls and ceilings so we open only what needs opening and document what the eye cannot see.

HEPA vacuum

Lifts fine soot from framing, drywall and surfaces without pushing it back into the air.

Air scrubber and negative air machine

Keeps airborne soot contained to the work area and filters the air during demolition and cleaning.

Hydroxyl generator and ozone generator

Neutralizes smoke odor in occupied and unoccupied spaces; we choose based on whether people and pets are in the home.

Moisture meter and dehumidifier

Tracks firefighting water in framing and insulation and dries the structure before deodorization.

Smoke odor counteractant fogger

Pushes deodorizing agent into wall cavities, closets and ductwork where smoke residue hides.

Real results

Before and after.

Hallway Panel Fire, Palos Verdes Estates

Before

A 1960s panel arced and burned the wall behind it, leaving char eight feet from the visible scorch mark and smoke residue through the hallway and two closets.

After

We opened the cavity, removed charred drywall and insulation, sealed the framing with char-blocking primer, and ran a hydroxyl generator for 72 hours. The wall was rebuilt and the circuit verified in six days.

Attic Fan Fire, Rolling Hills Estates

Before

A fan motor shorted and smoldered into blown insulation overnight, pushing soot into the HVAC system and leaving a smoke smell through the second floor.

After

We removed 140 square feet of contaminated insulation, HEPA vacuumed the sheathing, replaced HVAC filters and sealed ducts, then ran deodorization equipment for four days. The attic tested clean on the final walk.

Bedroom Outlet Fire, Lunada Bay

Before

An outlet fire scorched the wall and left soot on the ceiling and smoke in the closet of a rental apartment, with the neighboring unit reporting odor through a shared wall.

After

We scoped the unit separately, cleaned and sealed the wall, treated the closet and drapes, and documented tenant versus structural damage. The unit was back in use in four days.

Problems we solve

Electrical Fire Problems We Solve in PALOS VERDES PENINSULA

Electrical fires hide. They smolder inside walls, contaminate insulation and push smoke into rooms that never saw flame. If you are searching for electrical fire cleanup services near me PALOS VERDES PENINSULA, these are the four problems we are usually called in to fix.

Ask a pro →
01

Char hidden inside a wall cavity

We thermal-scan the wall, open only the affected section, sand char back to sound wood and seal it with a char-blocking primer. The cavity is HEPA vacuumed and photographed before it is closed.

↗
02

Smoke odor lingering after fire

We clean surfaces with soot sponges, run a hydroxyl generator or ozone generator, and fog the cavities with smoke odor counteractant. The source is removed, not masked, so the smell does not come back with the weather.

↗
03

Soot pulled into the HVAC system

We inspect the air handler and ducts, replace HVAC filters, seal joints with duct sealant and clean accessible duct runs. We tell you before you run the system again.

↗
04

Water damage from firefighting

We extract standing water, set dehumidifiers and air movers, and log moisture readings daily. Drying is finished before deodorization so we are not sealing moisture into a wall.

↗
Proof you can check

Licensed, Certified and Documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
RIA Certified Restorer (CR)Restoration Industry Association
✓
California Contractors State License Board (CSLB) licenseState of California
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most residential jobs run $2,800 to $12,500 in 2026, with a single-room outlet fire near the low end and a panel or attic fire near the high end. Cost is driven by how much drywall and insulation has to come out, whether the HVAC system pulled soot, and how many circuits need replacement. We give you a written scope and fixed price before demolition, and we document everything for your insurance claim.

We do, and we are local. Fire Damage Restoration Palos Verdes Peninsula has served the Hill since 2022 with IICRC FSRT and OCT certified technicians and an EPA Lead-Safe Certified Firm designation for older homes. Call (833) 929-6186 and a crew staged for Palos Verdes Estates, Rolling Hills or Rancho Palos Verdes can be at your door in 60 to 90 minutes, 24/7.

A contained outlet or switch fire is usually two to four days of active work. A panel fire that spread into a wall cavity runs five to ten days, and an attic fire with HVAC contamination can reach two to three weeks. Deodorization equipment often runs 48 to 96 hours after demolition is finished. We give you a day-by-day schedule at the scope walk and update it if the thermal camera finds more.

Yes. A circuit-by-circuit wiring inspection is part of every job, not an add-on. We check for burned neutrals, melted insulation and water intrusion from firefighting, then replace damaged devices and wiring before power is restored. You get the inspection documented in your closeout packet so your electrician and your adjuster both have a record of what was replaced and why.

Ready when you are

Get Electrical Fire Cleanup in PALOS VERDES PENINSULA, California

One call reaches a licensed, insured crew with IICRC-certified technicians and 24/7 dispatch. We answer at any hour, give you an arrival window, and put a written scope in your hands before demolition. Call (833) 929-6186 now.

Call Now (833) 929-6186 →
Request an appointment

Contact Our Peninsula Fire Restoration Team

Call (833) 929-6186 any time, day or night. A live person answers and can dispatch a crew to your Palos Verdes Estates, Rancho Palos Verdes, or Rolling Hills address within the hour. If you prefer email, send photos and your address to info@firedamagerestorationpalosverdespeninsula.com and we will respond the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186